ASENWARE AW-RP2188 REPEATER ANNUNCIATOR LCD

**Mohon Konfirmasi Qty Stock dahulu sebelum order**
**Untuk barang besar / berat diharapkan pilih pengiriman yg kargo**
ASENWARE AW-RP2188 REPEATER ANNUNCIATOR LCD

 Addressable Fire Alarm Repeater Feature:
    Each display panel is connected with a fire alarm control panel via a RS-48 bus. At most 99 display panels may be connected with each RS-485 bus.
    The display panels can display fire alarm messages or feedback messages only rather than fault messages, action messages or other messages.  
    A fire alarm control panel may be used for setting the display area of a display panel. The set display panel can display the fire alarm messages of the designated area (floor display) only. Note: See the User’s Manual of the fire alarm control panel for the setting method.
    It can replace a AW-AFP2100 fire display panel in a 2100 system.


Addressable Fire Alarm Repeater Technical parameters:
    Executive standard: General Technical Conditions for Fire Indicating Panels (GB17429-1998)
    Display capacity: Each display panel can display the fire alarm messages of floors -10~90 and at most 99 fire alarm messages or feedback messages.
    Wiring system: Four-wire system, power lines (+24V, GND) and RS485 signal lines (485A, 485B);
    Operating environment: Indoor; temperature: -10℃～+50℃; relative humidity: ≤95% (40℃, without condensation);
    Power supply: DC 24V ±20 %;
    Overall power consumption: ＜3W;
    Contact capacity: Relay dry contacts, normally open or normally closed, capacity: 1.25A/DC30V (resistive load).

Harga dan stock dapat berubah sewaktu-waktu
Untuk harga terbaik, silakan hubungi telp / wa kami
Ph. (021)30004937, 62304645, 56941969
HP/WA. 0853 1089 6160
Email: globalmakmurabadi@gmail.com
Sabtu Minggu Tutup
Untuk sebagian item, Order diatas jam 12 keatas, kemungkinan diproses besok hari.

Display zone annunciator